not-allowed-link

Foundation design

Improved quality and more efficient foundation designs mean that projects can more quickly go from the planning phase to the construction phase.

Tekla Tedds foundation design

The foundation is one of the most important parts of a structure—and one of the costliest.

Uncomplicated, constructible and economical foundations are the basis of successful structural design on both straightforward and difficult sites. Tedds improves structural and civil engineering productivity and quality by replacing repetitive time-consuming hand calculations with automated foundation design calculations. This makes foundation design more efficient so you can reliably deliver straightforward yet safe designs that get construction into the ground more quickly.

Foundation design

Footing analysis and design

Footing analysis and design

Tedds supports analysis and design of footings for Eurocode and USA. These calculations quickly check the analysis and design, or analysis only, of a pad or strip foundation in reinforced or plain concrete.

Watch the video at TUA
Pile analysis

Pile analysis

To speed up foundation design time, this pile analysis calculation for both Eurocode and USA, does a static analysis of the resistance capacity of single piles, driven or drilled, in multiple geomaterial strata. Steel, concrete, or timber piles can be analyzed for compressive and tensile axial loads and lateral loads. Lateral load analysis is for short rigid piles only.

Watch the video at TUA
RC Pile cap design

RC Pile cap design

This pile cap calculation for both Eurocode and USA, checks the design of pile caps supporting a single column with up to 9 piles. The column may be subject to axial compression or tension, shear loads, and biaxial bending. Possible load cases include permanent, imposed, snow and wind for all load types. Permanent and imposed surcharge loads may be defined. Steel, concrete or timber piles can be defined with compression, tension, and shear capacity. Defined capacities are compared to analysis results.

Watch the video at TUA

Concrete raft slab/slab on ground

This concrete calculation quickly assesses the ability of elements of a raft to support various loading arrangements without exceeding the allowable bearing pressure. It also determines the quantities of reinforcement required to support the loads whilst spanning theoretical circular depressions in the sub-soil which are assumed to form beneath the raft.

Steel sheet piling design

Steel sheet piling design

This calculation for steel sheet piling design Eurocode and USA checks the stability of either a cantilever or a propped/tied steel sheet pile wall. It determines the required minimum embedment length and then calculates the minimum required plastic section modulus per meter run of wall. The calculation will determine the tie/prop force where appropriate.

Watch the video at TUA

Free trial

Forget time consuming hand calculations and spreadsheets

Get your FREE trial here
Person quote
downward quote

I like the simple interface of Tedds and clear output, which has nearly all the standalone calculations I use daily.

— Giles Mortimer

Senior Structural Engineer, Engenuiti

Trimble Logo

INDIA (ENGLISH)

globe wireframe
magnifying glass
Tekla logo

Productscaret icon

Tekla Structures skip iconTekla Model Sharing skip iconTekla Structural Designer skip iconTekla Tedds skip iconTekla PowerFab skip iconTrimble Connect skip iconAll products skip icon

Solutions downward-facing caret

Designright caret

Constructible modeling skip iconConceptual design skip iconStructural analysis & design skip iconDesign communication skip iconConnected design skip icon

Detailright caret

Constructible detailing skip iconConstruction documentation skip icon

Fabricateright caret

Production planning & management skip iconAutomated production skip iconConnected project delivery skip icon

Constructright caret

Bid & win skip iconSite planning & coordination skip iconConnected worksite skip icon

Educateright caret

Tekla Campus skip iconTekla for students skip iconTekla for educators skip iconTekla for academic institutions skip icon

All solutions

Resourcescaret icon

Articles & blog posts skip iconReferences skip iconWebinars skip iconNews skip iconEvents skip iconTekla BIM Awards skip iconAll resources skip icon

Supportcaret icon

Tekla User Assistance skip iconTrimble Downloads skip iconTekla Discussion Forum skip iconTekla Warehouse skip iconTekla Developer Center skip iconTraining skip iconTekla Support Team skip iconAll support skip icon

Aboutcaret icon

Why Tekla & Trimble skip iconContact us skip iconCareers skip iconLicense compliance skip iconAll about skip icon

| INDIA (ENGLISH)

globe wireframe icon

Productscaret icon

  • Tekla Structures
  • Tekla Model Sharing
  • Tekla Structural Designer
  • Tekla Tedds
  • Tekla PowerFab
  • Trimble Connect
  • All products

Solutionscaret icon

Designcaret icon

  • Constructible modeling
  • Conceptual design
  • Structural analysis & design
  • Design communication
  • Connected design

Detailcaret icon

  • Constructible detailing
  • Construction documentation

Fabricatecaret icon

  • Production planning & management
  • Automated production
  • Connected project delivery

Constructcaret icon

  • Bid & win
  • Site planning & coordination
  • Connected worksite

Educatecaret icon

  • Tekla Campus
  • Tekla for students
  • Tekla for educators
  • Tekla for academic institutions
All solutions

Resourcescaret icon

  • Articles & blog posts
  • References
  • Webinars
  • News
  • Events
  • Tekla BIM Awards
  • All resources

Supportcaret icon

  • Tekla User Assistance
  • Trimble Downloads
  • Tekla Discussion Forum
  • Tekla Warehouse
  • Tekla Developer Center
  • Training
  • Tekla Support Team
  • All support

Aboutcaret icon

  • Why Tekla & Trimble
  • Contact us
  • Careers
  • License compliance
  • All about
  1. Home
  2. Products
  3. Tekla Tedds
  4. Foundation design
CONTACT US